Volume 73

Update 2017 on Target Fabrication Requirements for High-Performance NIF Implosion Experiments

S. W. Haan, D. S. Clark, C. R. Weber, S. H. Baxamusa, J. Biener, L. Berzak Hopkins, T. Bunn, D. A. Callahan, L. Carlson, M. J. Edwards, B. A. Hammel, A. Hamza, D. E. Hinkel, D. D. Ho, W. Hsing, H. Huang, O. A. Hurricane, M. A. Johnson, O. S. Jones, A. L. Kritcher, O. L. Landen, J. D. Lindl, M. M. Marinak, A. J. MacKinnon, N. B. Meezan, J. Milovich, A. Nikroo, J. L. Peterson, P. Patel, H. F. Robey, V. A. Smalyuk, B. K. Spears, M. Stadermann, J. L. Kline, D. C. Wilson, A. N. Simakov, A. Yi

The National Direct-Drive Program: OMEGA to the National Ignition Facility

S. P. Regan, V. N. Goncharov, T. C. Sangster, E. M. Campbell, R. Betti, K. S. Anderson, T. Bernat, A. Bose, T. R. Boehly, M. J. Bonino, D. Cao, R. Chapman, T. J. B. Collins, R. S. Craxton, A. K. Davis, J. A. Delettrez, D. H. Edgell, R. Epstein, M. Farrell, C. J. Forrest, J. A. Frenje, D. H. Froula, M. Gatu Johnson, C. Gibson, V. Yu. Glebov, A. Greenwood, D. R. Harding, M. Hohenberger, S. X. Hu, H. Huang, J. Hund, I. V. Igumenshchev, D. W. Jacobs-Perkins, R. T. Janezic, M. Karasik, R. L. Keck, J. H. Kelly, T. J. Kessler, J. P. Knauer, T. Z. Kosc, S. J. Loucks, J. A. Marozas, F. J. Marshall, R. L. McCrory, P. W. McKenty, D. D. Meyerhofer, D. T. Michel, J. F. Myatt, S. P. Obenschain, R. D. Petrasso, N. Petta, P. B. Radha, M. J. Rosenberg, A. J. Schmitt, M. J. Schmitt, M. Schoff, W. Seka, W. T. Shmayda, M. J. Shoup, III, A. Shvydky, A. A. Solodov, C. Stoeckl, W. Sweet, C. Taylor, R. Taylor, W. Theobald, J. Ulreich, M. D. Wittman, K. M. Woo, J. D. Zuegel

Metrology Feasibility Study in Support of the National Direct-Drive Program

H. Huang, K. Engelhorn, K. Sequoia, A. Greenwood, W. Sweet, L. Carlson, F. Elsner, M. Farrell

Evaluation of Direct Drive Capsule Fill-Tube Assembly Survivability in Support of the 100 GBar Campaign

L. C. Carlson, P. Fitzsimmons, S. Pajoom, R. Petzoldt, A. Tambazidis, D. Harding, R. Chapman, J. Ulreich, M. Wittman

Quantitative Submicron Particulate Characterization by Dark-Field Microscopy

T. Bernat, C. Castro, A. Pasternak, J. Sin, O. Stein, N. Petta

Characterization of Laser Megajoule Targets by X-Ray Tomography

Alexandre Choux, Lise Barnouin, Ludovic Reverdy, Marc Theobald

Developments in Shell Surface Characterizations Using Holography

A. Chobriat, O. Raphaël, C. Hermerel, E. Busvelle, A. Choux, P. Merillot, L. Reverdy, M. Theobald

Enhanced Dual Confocal Measurement System

K. Tomlinson, C. T. Seagle, H. Huang, G. E. Smith, J. L. Taylor, R. R. Paguio

Application of Additive Manufacturing for Laser Target Fabrication

J. Andre, G. De Demo, K. Molina, S. Le Tacon, C. Chicanne, M. Theobald

Fabrication of Low-Density Shock-Propagation Targets Using Two-Photon Polymerization

O. Stein, Y. Liu, J. Streit, J. H. Campbell, Y. F. Lu, Y. Aglitskiy, N. Petta

Lithographic Printing Via Two-Photon Polymerization of Engineered Foams

Matthew J. Herman, Dominic Peterson, Kevin Henderson, Tana Cardenas, Christopher E. Hamilton, John Oertel, Brian M. Patterson

Quantitative Analysis of Ultralow-Density Materials Using Laboratory-Based Quasi-Monochromatic Radiography

Brian M. Patterson, John Sain, Richard Seugling, Miguel Santiago-Cordoba, Lynne Goodwin, John Oertel, Joseph Cowan, Christopher E. Hamilton, Nikolaus L. Cordes, Stuart A. Gammon, Theodore F. Baumann

Quantitative Determination of Wax Contamination in Polystyrene HIPE Foam Using Solid-State NMR

Kyle J. Cluff, Lynne A. Goodwin, Christopher E. Hamilton, Matthew N. Lee, John A. Oertel

Dry-Machining of Aerogel Foams, CH Foams, and Specially Engineered Foams Using Turn-Milling Techniques

Randall B. Randolph, John A. Oertel, Tana Cardenas, Christopher E. Hamilton, Derek W. Schmidt, Brian M. Patterson, Franklin Fierro, Deanna Capelli

Fabrication of Low-Density Foam Liners in Hohlraums for NIF Targets

Suhas Bhandarkar, Ted Baumann, Noel Alfonso, Cliff Thomas, Kevin Baker, Alastair Moore, Cindy Larson, Don Bennett, John Sain, Abbas Nikroo

Zinc Oxide–Coated Poly(HIPE) Annular Liners to Advance Laser Indirect Drive Inertial Confinement Fusion

Paul Fitzsimmons, Fred Elsner, Reny Paguio, Abbas Nikroo, Cliff Thomas, Kevin Baker, Haibo Huang, Mike Schoff, David Kaczala, Hannah Reynolds, Sean Felker, Mike Farrell, Brian J. Watson

Platinum Electrodeposition for Supported ALD Templated Foam Hohlraum Liners

Corie Horwood, Michael Stadermann, Monika Biener, Don Bennett, Suhas Bhandarkar, Thomas L. Bunn

Supercritical Drying of Wet Gel Layers Generated Inside ICF Ablator Shells

Tom Braun, Sung Ho Kim, Monika M. Biener, Alex V. Hamza, Juergen Biener

Using Digital Microfluidics to Dispense, Combine, and Transport Low-Surface-Energy Fluids

B. P. Chock, D. R. Harding, T. B. Jones

Performance of Different “Lab-On-Chip” Geometries for Making Double Emulsions to Form Polystyrene Shells

N. D. Viza, D. R. Harding

Controlled Generation of Double Emulsions for Laser Fusion Target Fabrication Using a Glass Capillary Microfluidic Device

Yuki Iwasa, Kohei Yamanoi, Yumi Kaneyasu, Takayoshi Norimatsu

Fabrication of Multilayer GDP Targets for Foil Thickness Experiments

Stephan A. Letts, Jared F. Hund, Justin Sin, Jonathan Monterrosa, Brian Motta, Rod Cahayag, Nicole Petta

Evaluation of Polyimide/Carbon Composite Films for Capsule Support

M. Stadermann, C. Aracne-Ruddle, J. Florio, S. Felker, J. Bigelow, S. Johnson, B. Lairson, J. Betcher

Capsule Shimming Developments for National Ignition Facility (NIF) Hohlraum Asymmetry Experiments

N. Rice, M. Vu, C. Kong, M. Mauldin, A. Tambazidis, M. Hoppe, Jr., P. Fitzsimmons, M. Farrell, D. Clark, E. Dewald, V. Smalyuk

Novel Capsule Fill Tube Assemblies for the Hydrodynamic Growth Radiography Targets

J. W. Crippen, E. L. Alfonso, N. G. Rice, C. Kong, M. McInnis, S. Felker