American Nuclear Society
Join ANS|Member Center|ANS Store|Contact Us
Home

Home / Publications / Journals / Fusion Science and Technology / Volume 70

Volume 70

Number 1 | Number 2 | Number 3

Number 1

GPEC: A Real-Time–Capable Tokamak Equilibrium Code

Markus Rampp, Roland Preuss, Rainer Fischer, ASDEX Upgrade Team

Fusion Science and Technology / Volume 70 / Number 1 / July 2016 / Pages 1-13

Technical Paper / dx.doi.org/10.13182/FST15-154

Generic Magnetic Fusion Reactor Revisited

John Sheffield, Stanley L. Milora

Fusion Science and Technology / Volume 70 / Number 1 / July 2016 / Pages 14-35

Technical Paper / dx.doi.org/10.13182/FST15-157

Catalyzed D-D Stellarator Reactor

John Sheffield, Donald A. Spong

Fusion Science and Technology / Volume 70 / Number 1 / July 2016 / Pages 36-53

Technical Paper / dx.doi.org/10.13182/FST15-161

Fishbone Modes in Plasmas with Dual Neutral Beam Injection Heating

Hongda He, J. Q. Dong, Zhixiong He, K. Zhao

Fusion Science and Technology / Volume 70 / Number 1 / July 2016 / Pages 54-61

Technical Paper / dx.doi.org/10.13182/FST15-169

Design of Control System for Suppression of Neoclassical Tearing Modes with Electron Cyclotron Heating and Current Drive on EAST

Y. Zhang, X. G. Wang, X. J. Wang, H. C. Hu, Y. Liu, A. Ti, L. Q. Xu, X. D. Zhang, EAST Team

Fusion Science and Technology / Volume 70 / Number 1 / July 2016 / Pages 62-72

Technical Paper / dx.doi.org/10.13182/FST15-138

Growth of Axisymmetric Instabilities in ASDEX Upgrade

T. Sehmer, K. Lackner, E. Strumberger, E. Fable, O. Kardaun, P. McCarthy, ASDEX Upgrade Team

Fusion Science and Technology / Volume 70 / Number 1 / July 2016 / Pages 73-82

Technical Paper / dx.doi.org/10.13182/FST15-175

Linear Instability Analysis of Magnetohydrodynamic Flow in a Rectangular Duct with Side Walls of Unsymmetrical Conductivity

Chan Liu, Ming-Jiu Ni, Nian-Mei Zhang

Fusion Science and Technology / Volume 70 / Number 1 / July 2016 / Pages 83-96

Technical Paper / dx.doi.org/10.13182/FST15-141

Tritium Migration to the Surfaces of Type 316 Stainless Steel; Aluminum 6061; and Oxygen-Free, High-Conductivity Copper

M. Sharpe, W. T. Shmayda, W. U. Schröder

Fusion Science and Technology / Volume 70 / Number 1 / July 2016 / Pages 97-111

Technical Paper / dx.doi.org/10.13182/FST15-198

Outline Design of ITER Radial X-Ray Camera Diagnostic

L. Hu, K. Chen, Y. Chen, S. Li, J. Shen, X. Sheng, L. Niu, Y. Cheng, J. Zhao

Fusion Science and Technology / Volume 70 / Number 1 / July 2016 / Pages 112-118

Technical Note / dx.doi.org/10.13182/FST15-137

Number 2

Update 2015 on Target Fabrication Requirements for NIF Layered Implosions, with Emphasis on Capsule Support and Oxygen Modulations in GDP

S. W. Haan, D. S. Clark, S. H. Baxamusa, J. Biener, L. Berzak Hopkins, T. Bunn, D. A. Callahan, L. Carlson, T. R. Dittrich, M. J. Edwards, B. A. Hammel, A. Hamza, D. E. Hinkel, D. D. Ho, D. Hoover, W. Hsing, H. Huang, O. A. Hurricane, M. A. Johnson, O. S. Jones, A. L. Kritcher, O. L. Landen, J. D. Lindl, M. M. Marinak, A. J. MacKinnon, N. B. Meezan, J. Milovich, A. Nikroo, J. L. Peterson, P. Patel, H. F. Robey, J. D. Salmonson, V. A. Smalyuk, B. K. Spears, M. Stadermann, S. V. Weber, J. L. Kline, D. C. Wilson, A. N. Simakov, A. Yi

Fusion Science and Technology / Volume 70 / Number 2 / August-September 2016 / Pages 121-126

Technical Paper / dx.doi.org/10.13182/FST15-244

Understanding the Critical Parameters of the PAMS Mandrel Fabrication Process

Suhas Bhandarkar, Reny Paguio, Fred Elsner, Denise Hoover, Abbas Nikroo, Chris Guido

Fusion Science and Technology / Volume 70 / Number 2 / August-September 2016 / Pages 127-136

Technical Paper / dx.doi.org/10.13182/FST15-245

Tumble Polishing of Faster-Coated Glow Discharge Polymer Capsules

N. G. Rice, K. C. Chen, D. E. Hoover, A. M. Garcia, A. Nikroo, N. Dorsano

Fusion Science and Technology / Volume 70 / Number 2 / August-September 2016 / Pages 137-140

Technical Paper / dx.doi.org/10.13182/FST15-250

Surface Modification of ICF Target Capsules by Pulsed Laser Ablation

L. C. Carlson, M. A. Johnson, T. L. Bunn

Fusion Science and Technology / Volume 70 / Number 2 / August-September 2016 / Pages 141-153

Technical Paper / dx.doi.org/10.13182/FST15-248

Planarization of Isolated Defects on ICF Target Capsule Surfaces by Pulsed Laser Ablation

Noel Alfonso, Lane C. Carlson, Thomas L. Bunn

Fusion Science and Technology / Volume 70 / Number 2 / August-September 2016 / Pages 154-163

Technical Paper / dx.doi.org/10.13182/FST15-224

Gas Retention in Multilayer Alternate Ablator Capsules

Claudia M. Shuldberg, Michael E. Schoff, Hongwei Xu, Noel L. Alfonso, Erwin Castillo, Jay W. Crippen, Martin L. Hoppe Sr., Michael P. Farrell

Fusion Science and Technology / Volume 70 / Number 2 / August-September 2016 / Pages 164-172

Technical Paper / dx.doi.org/10.13182/FST15-231

Growth of a Solid D-T Crystal from the Liquid Inside Inertial Confinement Fusion Targets

D. R. Harding, D. Whitaker, C. Fella

Fusion Science and Technology / Volume 70 / Number 2 / August-September 2016 / Pages 173-183

Technical Paper / dx.doi.org/10.13182/FST15-211

Supercooling of Hydrogen on Template Materials to Deterministically Seed Ignition-Quality Solid Fuel Layers

S. J. Shin, L. A. Zepeda-Ruiz, J. R. I. Lee, S. H. Baxamusa, R. Dylla-Spears, T. Suratwala, B. J. Kozioziemski

Fusion Science and Technology / Volume 70 / Number 2 / August-September 2016 / Pages 184-190

Technical Paper / dx.doi.org/10.13182/FST15-212

Technique for Forming Solid D2 and D-T Layers for Shock Timing Experiments at the National Ignition Facility

J. D. Sater, F. Espinosa-Loza, B. Kozioziemski, E. R. Mapoles, R. Dylla-Spears, J. W. Pipes, C. F. Walters

Fusion Science and Technology / Volume 70 / Number 2 / August-September 2016 / Pages 191-195

Technical Paper / dx.doi.org/10.13182/FST15-204

Zinc-Nucleated D2 and H2 Crystal Formation from Their Liquids

T. P. Bernat, N. Petta, B. Kozioziemski, S. J. Shin, D. R. Harding

Fusion Science and Technology / Volume 70 / Number 2 / August-September 2016 / Pages 196-205

Technical Paper / dx.doi.org/10.13182/FST15-223

Effect of a Surfactant on the Electric-Field Assembly of Oil-Water Emulsions for Making Foam Targets

B. P. Chock, T. B. Jones, D. R. Harding

Fusion Science and Technology / Volume 70 / Number 2 / August-September 2016 / Pages 206-218

Technical Paper / dx.doi.org/10.13182/FST15-215

The Effects of a Surfactant on the Operation of T-Junctions for Mass-Producing Foam Targets

N. D. Viza, M. H. Romanofsky, M. J. Moynihan, D. R. Harding

Fusion Science and Technology / Volume 70 / Number 2 / August-September 2016 / Pages 219-225

Technical Paper / dx.doi.org/10.13182/FST15-216

Development of Hierarchical, Tunable Pore Size Polymer Foams for ICF Targets

Christopher E. Hamilton, Matthew N. Lee, A. Nicholas G. Parra-Vasquez

Fusion Science and Technology / Volume 70 / Number 2 / August-September 2016 / Pages 226-229

Technical Paper / dx.doi.org/10.13182/FST15-227

Process Development and Micro-Machining of MARBLE Foam-Cored Rexolite Hemi-Shell Ablator Capsules

Randall B. Randolph, John A. Oertel, Derek W. Schmidt, Matthew N. Lee, Brian M. Patterson, Kevin C. Henderson, Christopher E. Hamilton

Fusion Science and Technology / Volume 70 / Number 2 / August-September 2016 / Pages 230-236

Technical Paper / dx.doi.org/10.13182/FST15-205

Specific Adaptations of Mechanical Machining Processes for Laser Target Manufacturing

J. Andre, R. Botrel, J. Schunck, A. Pinay, C. Chicanne, M. Theobald

Fusion Science and Technology / Volume 70 / Number 2 / August-September 2016 / Pages 237-243

Technical Paper / dx.doi.org/10.13182/FST15-241

Sinusoidal Ripples Micromachining on CHx Ablator for Hydrodynamics Growth Experiments

I. Geoffray, J. Andre, R. Bourdenet, J. Schunck, C. Chicanne, M. Theobald

Fusion Science and Technology / Volume 70 / Number 2 / August-September 2016 / Pages 244-253

Technical Paper / dx.doi.org/10.13182/FST15-221

Linear Sine Wave Profiling to Machine Instability Targets

D. W. Schmidt, J. I. Martinez

Fusion Science and Technology / Volume 70 / Number 2 / August-September 2016 / Pages 254-257

Technical Paper / dx.doi.org/10.13182/FST15-225

Machining of Two-Dimensional Sinusoidal Defects on Ignition-Type Capsules to Study Hydrodynamic Instability at the National Ignition Facility

E. M. Giraldez, M. L. Hoppe Jr., D. E. Hoover, A. Q. L. Nguyen, N. G. Rice, A. M. Garcia, H. Huang, M. P. Mauldin, M. P. Farrell, A. Nikroo, V. Smalyuk

Fusion Science and Technology / Volume 70 / Number 2 / August-September 2016 / Pages 258-264

Technical Paper / dx.doi.org/10.13182/FST15-234

A Flexure-Based Mechanism for Precision Adjustment of National Ignition Facility Target Shrouds in Three Rotational Degrees of Freedom

K.-J. Boehm, C. R. Gibson, J. R. Hollaway, F. Espinosa-Loza

Fusion Science and Technology / Volume 70 / Number 2 / August-September 2016 / Pages 265-273

Technical Paper / dx.doi.org/10.13182/FST15-217

Automation of NIF Target Fabrication

L. C. Carlson, H. Huang, N. Alexander, J. Bousquet, M. Farrell, A. Nikroo

Fusion Science and Technology / Volume 70 / Number 2 / August-September 2016 / Pages 274-287

Technical Paper / dx.doi.org/10.13182/FST15-226

Additive Manufacturing Capabilities Applied to Inertial Confinement Fusion at Los Alamos National Laboratory

Tana Cardenas, Derek W. Schmidt, Dominic S. Peterson

Fusion Science and Technology / Volume 70 / Number 2 / August-September 2016 / Pages 288-294

Technical Paper / dx.doi.org/10.13182/FST15-249

Direct Writing Target Structures by Two-Photon Polymerization

L. J. Jiang, J. H. Campbell, Y. F. Lu, T. Bernat, N. Petta

Fusion Science and Technology / Volume 70 / Number 2 / August-September 2016 / Pages 295-309

Technical Paper / dx.doi.org/10.13182/FST15-222

Fabrication of Micron-Scale Cylindrical Tubes by Two-Photon Polymerization

T. P. Bernat, J. H. Campbell, N. Petta, I. Sakellari, S. Koo, J.-H. Yoo, C. Grigoropoulos

Fusion Science and Technology / Volume 70 / Number 2 / August-September 2016 / Pages 310-315

Technical Paper / dx.doi.org/10.13182/FST15-219

Development of Indirectly Driven Shock Tube Targets for Counter-Propagating Shear-Driven Kelvin-Helmholtz Experiments on the National Ignition Facility

D. Capelli, D. W. Schmidt, T. Cardenas, G. Rivera, R. B. Randolph, F. Fierro, E. C. Merritt, K. A. Flippo, F. W. Doss, J. L. Kline

Fusion Science and Technology / Volume 70 / Number 2 / August-September 2016 / Pages 316-323

Technical Paper / dx.doi.org/10.13182/FST15-229

Design and Engineering of a Target for X-Ray Thomson Scattering Measurements on Matter at Extreme Densities and Gigabar Pressures

K.-J. Boehm, N. Hash, D. Barker, T. Döppner, M. P. Farrell, P. Fitzsimmons, D. Kaczala, D. Kraus, B. Maranville, M. Mauldin, P. Neumayer, K. Segraves

Fusion Science and Technology / Volume 70 / Number 2 / August-September 2016 / Pages 324-331

Technical Paper / dx.doi.org/10.13182/FST15-242

Constitutive Models for the Viscoelastic Behavior of Polyimide Membranes at Room and Deep Cryogenic Temperatures

Suhas Bhandarkar, Jacob Betcher, Ryan Smith, Bruce Lairson, Travis Ayers

Fusion Science and Technology / Volume 70 / Number 2 / August-September 2016 / Pages 332-340

Technical Paper / dx.doi.org/10.13182/FST15-218

Phenomenological Model for Gold-Copper Electrodeposition: Application to Thick Coatings

F. Durut, R. Botrel, E. Brun, S. Le Tacon, C. Chicanne, O. Vincent-Viry, M. Theobald, V. Vignal

Fusion Science and Technology / Volume 70 / Number 2 / August-September 2016 / Pages 341-350

Technical Paper / dx.doi.org/10.13182/FST15-230

Rare-Earth Thin-Film Deposition and Oxidation Study

S. Le Tacon, A. Brodier, C. Chicanne, M. Theobald

Fusion Science and Technology / Volume 70 / Number 2 / August-September 2016 / Pages 351-357

Technical Paper / dx.doi.org/10.13182/FST15-240

Fabrication, Characterization, and Modeling of Comixed Films for NXS Calibration Targets

Javier Jaquez, Mike Farrell, Haibo Huang, Abbas Nikroo, Sean Regan, Kevin Fournier, Maria Alejandra Barrios Garcia, Frederic Perez

Fusion Science and Technology / Volume 70 / Number 2 / August-September 2016 / Pages 358-364

Technical Paper / dx.doi.org/10.13182/FST15-247

Improvements in Fabrication of Elastic Scattering Foils Used to Measure Neutron Yield by the Magnetic Recoil Spectrometer

H. G. Reynolds, M. E. Schoff, M. P. Farrell, M. Gatu Johnson, R. M. Bionta, J. A. Frenje

Fusion Science and Technology / Volume 70 / Number 2 / August-September 2016 / Pages 365-371

Technical Paper / dx.doi.org/10.13182/FST15-235

Fabrication of Large-Area Glow Discharge Polymer–Deposited Foils

M. E. Schoff, E. R. Castillo, N. M. Ravelo, M. P. Farrell

Fusion Science and Technology / Volume 70 / Number 2 / August-September 2016 / Pages 372-376

Technical Paper / dx.doi.org/10.13182/FST15-243

Quantitative Defect Analysis of Ablator Capsule Surfaces Using a Leica Confocal Microscope and a High-Density Atomic Force Microscope

H. Huang, L. C. Carlson, W. Requieron, N. Rice, D. Hoover, M. Farrell, D. Goodin, A. Nikroo, J. Biener, M. Stadernann, S. W. Haan, D. Ho, C. Wild

Fusion Science and Technology / Volume 70 / Number 2 / August-September 2016 / Pages 377-386

Technical Paper / dx.doi.org/10.13182/FST15-220

Number 3

Multimachine Data–Based Prediction of High-Frequency Sensor Signal Noise for Resistive Wall Mode Control in ITER

Yueqiang Liu, S. A. Sabbagh, I. T. Chapman, S. Gerasimov, Y. Gribov, T. C. Hender, V. Igochine, M. Maraschek, G. Matsunaga, M. Okabayashi, E. J. Strait

Fusion Science and Technology / Volume 70 / Number 3 / November 2016 / Pages 387-405

Technical Paper / dx.doi.org/10.13182/FST15-207

Neoclassical Transport and Iota Scaling in the TJ-II Stellarator

F. Castejón, A. J. Rubio-Montero, A. López-Fraguas, E. Ascasíbar, R. Mayo-García

Fusion Science and Technology / Volume 70 / Number 3 / November 2016 / Pages 406-416

Technical Paper / dx.doi.org/10.13182/FST15-165

Relaxation of Surface Tension Waves on a Liquid Metal Mirror for a Fast-Ignition Laser Fusion Plant

Takayoshi Norimatsu, Oleg Kotyaev, Yoshinori Shimada, Shinri Kurahashi, Shinji Motokoshi, Katsuhiro Mikami, Kei Sasaki, Takahisa Jitsuno, Kohei Yamanoi, Hiroyuki Furukawa, Tomoaki Kunugi

Fusion Science and Technology / Volume 70 / Number 3 / November 2016 / Pages 417-422

Technical Paper / dx.doi.org/10.13182/FST15-206

The Design and Manufacture of the Neutral Beam Injection Thermal Shield for the EAST Tokamak

Changle Liu, Damao Yao, Lei Li, Jie Zhang, Hao Yang, Yang Qiu, Xiang Gao

Fusion Science and Technology / Volume 70 / Number 3 / November 2016 / Pages 423-428

Technical Paper / dx.doi.org/10.13182/FST15-246

Analysis of Energy Deposition on Ion Source Components of EAST Neutral Beam Injector

Xiang Li, Yongjian Xu, Chundong Hu, Ling Yu, Yu Chen, NBI Group

Fusion Science and Technology / Volume 70 / Number 3 / November 2016 / Pages 429-434

Technical Paper / dx.doi.org/10.13182/FST15-251

Main Features of the Technology for Air Detritiation in Scrubber Column

M. Rozenkevich, Yu. Pak, S. Marunich, A. Bukin, A. Ivanova, A. Perevezentsev, L. Lepetit

Fusion Science and Technology / Volume 70 / Number 3 / November 2016 / Pages 435-447

Technical Paper / dx.doi.org/10.13182/FST15-153

Multidimensional Heat Transfer and Flow Boiling Curve Measurements in Single-Side-Heated Flow Channels

R. D. Boyd, A. M. May, P. Cofie, R. Martin

Fusion Science and Technology / Volume 70 / Number 3 / November 2016 / Pages 448-460

Technical Paper / dx.doi.org/10.13182/FST16-102

Effects of Internal Bremsstrahlung on Tritium Profile Reconstruction in BIXS Measurements

Zhilin Chen, Masao Matsuyama, Shinsuke Abe, Shuming Peng

Fusion Science and Technology / Volume 70 / Number 3 / November 2016 / Pages 461-467

Technical Note / dx.doi.org/10.13182/FST15-151

 

Home|Contact Us|Invoice Payment|Nuclear Links

Privacy Policy|Terms of Use