An Integral Effect Test on the Reflood Period of a Large-Break LOCA for the APR1400 Using ATLAS

A thermal-hydraulic integral effect test facility, Advanced Thermal-Hydraulic Test Loop for Accident Simulation (ATLAS), has been constructed at the Korea Atomic Energy Research Institute. It is a 1/2-reduced-height and 1/288-volume-scaled test facility based on the design features of APR1400, an evolutionary pressurized water reactor developed by the Korean industry. ATLAS was used to perform a set of integral effect tests on the reflood period of a large-break loss-of-coolant accident (LBLOCA) after intensive performance tests had been conducted to verify ATLAS's operational performance and controllability for major thermal-hydraulic components. The present LB-CL-09 test is one of the integral effect reflood tests for investigating the thermal-hydraulic characteristics during an entire reflood period that can be used to provide reliable data to help validate the LBLOCA analysis methodology for APR1400. The main objective of the present test is to identify the major thermal-hydraulic characteristics such as the direct emergency core coolant (ECC) bypass, downcomer boiling, and core cooling behavior during the reflood phase of an LBLOCA for APR1400 under conditions where the downcomer region interacts with the reactor core region and the heat could be transferred through the steam generator. The initial and boundary conditions were obtained by applying scaling ratios to the MARS simulation results. The decay heat and the ECC flow rate from the safety injection tank were simulated from the start of the reflood period. The ECC flow rate from the safety injection pump was 0.32 kg/s. The system pressure was fixed at [approximately]0.1 MPa, and the initial outer-wall temperature was determined to be 205°C. The experimental results showed the typical thermal-hydraulic trends expected to occur during the reflood phase of the LBLOCA scenario.