Criticality Evaluation During Fuel Debris Particle Sedimentation Using Coupled DEM-MPS Code

From the viewpoint of criticality management in the fuel debris retrieval operation at the Fukushima Daiichi Nuclear Power Station, it is important in criticality safety analyses to consider the behavior of fuel debris particles as they fall into the water, given that the neutron moderation condition of the fuel debris can dramatically change. In this study, we evaluated a reactivity insertion while fuel debris particles dropped into the water. Specifically, we considered the effects of the fuel debris particle-size distribution in either an erroneous operation or a postulated accident in the fuel debris retrieval operation. Three types of fuel debris particle-size distribution were assumed: monodisperse, uniform, and Rosin-Rammler. The behaviors of the fuel debris particles during sedimentation were evaluated using the coupled Distinct Element Method–Moving Particle Simulation (DEM-MPS) code. The multiplication factors corresponding to the behaviors of the falling fuel debris were calculated by a continuous-energy Monte Carlo code MVP3.0 with JENDL-4.0. Consequently, the multiplication factors changed with the particle motions during the sedimentation, and the trends of the multiplication factors differed between the particle-size distributions. Especially, the 2-cm monodisperse particle-size distribution showed the highest multiplication factor during sedimentation, the trend of which differed from the others in the fuel debris particles dispersing and piled-up phases in the water.