Home / Publications / Journals / Nuclear Technology / Volume 129 / Number 2
Nuclear Technology / Volume 129 / Number 2 / February 2000 / Pages 141-151
Technical Paper / Fuel Cycle and Management / dx.doi.org/10.13182/NT00-A3053
Articles are hosted by Taylor and Francis Online.
Boiling water reactor (BWR) fuel at burnup of 41 to 45 GWd/tonne U was pulse irradiated in the Nuclear Safety Research Reactor (NSRR) to investigate fuel behavior under cold startup reactivity-initiated-accident conditions. Current Japanese BWR fuel, 8 × 8BJ type (Step I), from Fukushima-Daiichi Unit 3 was refabricated into short segments, and the test rods were promptly subjected to thermal energy from 293 to 607 J/g (70 to 145 cal/g) within ~20 ms. The fuel cladding was ductile enough to survive the prompt deformation due to pellet cladding mechanical interaction, while the plastic hoop strain reached 1.5% at the peak location. Transient fission gas release by the pulse irradiation varied from 3.1 to 8.2%, depending on the peak fuel enthalpy and the steady-state operation conditions.