Effects of Break Size on Direct Vessel Injection Line Break Accidents of the ATLAS

The direct vessel injection (DVI)-adopted power plant APR1400 considers a DVI line break among the analyzed small-break loss-of-coolant accidents in safety analysis. The first-ever integral effects test database for various DVI line break sizes from 5% to 100% was established with the Korea Atomic Energy Research Institute's Advanced Thermal-Hydraulic Test Loop for Accident Simulation (ATLAS) test facility. This database enhances our physical understanding of the major thermal-hydraulic behaviors of the APR1400 during DVI line break accidents, and it can also be used to examine the prediction capabilities and identify any deficiencies in the existing best-estimate safety analysis codes. Effects of the break size were experimentally investigated, and the best-estimated MARS code was assessed against the experimental database. On the whole, the prediction of the MARS code shows a good agreement with the measured data. However, the code predicted a higher core level than the data just before a loop seal clearing occurs, and it also produced a more rapid decrease in the downcomer water level than the data. These disagreements are the expected consequence of uncertainties in predicting countercurrent flow or condensation phenomena in a downcomer region. The present integral effects test data will be used to support the present conservative safety analysis methodology and to develop a new best-estimate safety analysis methodology on the DVI line break accidents of the APR1400.