Impact of Various Parameters on Convergence Performance of CMFD Acceleration for MOC in Multigroup Heterogeneous Geometry

The impact of various parameters in the coarse mesh finite difference (CMFD) acceleration method on overall convergence behavior is investigated through numerical calculations using the method of characteristics (MOC). Four parameters appearing in the CMFD acceleration with MOC, i.e., scalar flux distribution in flat flux regions (FFRFlux), the scalar flux distribution in CMFD meshes (CMFDFlux), homogenized cross sections (HXSs) in CMFD meshes, and current correction factors (CCFs), are considered. Parts of these four parameters are fixed to the converged values throughout iterations in order to estimate their impact on convergence. Numerical calculations are carried out for Korea Advanced Institute of Science and Technology’s (KAIST’s) benchmark problem KAIST-2A, which is a heterogeneous and multigroup problem, and the number of outer iterations to reach convergence is evaluated. The impact of geometric heterogeneity and cross-section homogenization in the CMFD acceleration has not been considered in linearized Fourier analysis so far. The calculation results indicate that (1) convergence of HXS has little impact on the overall convergence, (2) convergence of FFRFlux is dominant followed by CCF when a CMFD mesh is optically thin, and (3) convergence of FFRFlux is dominant when a CMFD mesh is optically thick and contains many flat flux regions.