Study of Critical Heat Flux in Natural Convection–Cooled TRIGA Reactors with Single Annulus and Rod Bundle Geometries

A critical heat flux (CHF) experimental study at low pressure and natural convection condition has been conducted. The test apparatus is a natural circulation loop with an upward flow channel, simulating TRIGA (Training, Research, Isotopes, General Atomics) reactors. CHF is studied in three types of geometries: a single-rod annulus, a three-rod bundle in a trefoil tube, and a four-rod bundle in a square tube. The full-scale fuel pin heater rod is electrically heated with a prototypic axial power profile, equipped with thermocouples for CHF detection. Experiments are carried out at the following conditions: inlet subcooling from 10 to 70 K, pressure from 110 to 290 kPa, and mass flux from 0 to 400 kg/m²·s. It is observed that CHF increases as the pressure or mass flux increases but does not significantly depend on the inlet subcooling within the testing range. The current CHF data are compared with a few selected CHF correlations whose application ranges are close to the testing conditions. The relevance of the CHF to the testing parameters is investigated. A modified CHF correlation compatible with TRIGA reactor conditions is proposed based on a previous correlation and current experimental data.