Japan’s Efforts to Develop the Concept of JA DEMO During the Past Decade

This paper summarizes the evolution of Japanese DEMO design studies in a retrospective manner by highlighting efforts to resolve critical design issues on DEMO. Japan is currently working on the conceptual study of a steady-state DEMO (JA DEMO) with a major radius Rp of 8.5 m and fusion power Pfus of 1.5 to 2 GW based on water-cooled solid breeding blanket with pressurized water reactor water condition (290ºC to 325ºC, 15.5 MPa). Such a lower Pfus allows to find realistic design solutions for divertor heat removal. Recognizing that divertor heat removal is one of the most challenging issues on DEMO, the divertor design has been carried out in different approaches, including numerical divertor plasma simulation, magnetic configurations, heat sink design, etc. It is noteworthy that the latest divertor simulation led to a design window allowing divertor heat removal of the peak heat flux of <10 MW/m². The breeding blanket (BB) design has been concentrated on simplification of the internal structure and pressure tightness of the BB casing against the in-box loss-of-coolant accident. Due to a large amount of radioactive waste generated in periodic replacement of in-vessel components, downsizing of waste-related facilities has come to be regarded as a significant design issue. A possible waste management for reducing temporary waste storage was proposed, and its impact on the plant layout was assessed.