Interpretation of Plasma Fluctuation Data from Combination Measurement of a Perpendicular-View Camera and a Langmuir Probe in Heliotron J

In the medium-sized heliotron device Heliotron J, edge density fluctuation has been measured simultaneously with a high-speed video camera and a Langmuir probe. Poloidally propagating, parallel elongating filamentary structures with 20- to 30-kHz frequency and ~14-cm poloidal wavelength were observed by a camera. However, the radial position of this density mode is not well known with only camera data because the camera lens axis is perpendicular to the torus plane. To identify the span of this density mode, plasma-surface interaction (PSI) between the probe and the plasma has been analyzed. As the probe scanned into the plasma, enhanced brightness due to PSI was clearly observed in camera images. By comparing this enhanced brightness among different probe positions, the outmost margin of the 20- to 30-kHz mode observed by the camera has been identified to be within 10 mm outside from the last closed flux surface. This conclusion is supported by the spectrum of the probe data.